2018 RAM 1500
Mileage
97,243
Service Date
7/2/2025
Services Performed
- CHECK VEHICLE – CUSTOMER WAS TOLD BY GARYS GARGE IT WAS BAD 2 CV AXELS AND, RACK AND PINION REPLACED. WAS A CLUNK IN STEERING WHEEL EVERY SO OFTEN
- Removed tie rod ends from spindles and removed from inner tie rod ends. Removed steering shaft from rack and disconnected all electrical connectors. Removed retaining bolts and removed rack from vehicle. Installed new and assembled in reverse order with new outer tie rod ends.
- Removed caliper assemblies and separated upper ball joints from spindles. Removed axle nut and removed both front half shafts. Installed new and assembled in reverse order.
- Hooked up heads, compensated and took measurements and found front toe is out of spec. Set steering wheel straight, adjusted front toe to within spec and test drove to confirm proper operation.
RUTH L. gave our service a 5 star review on 7/2/2025
