Confirmed complaint, removed left rear taillight and removed upper bulb. Found bulb is good but connector is corroded badly and will need to be replaced. Customer opted to cut connector out of a wrecked truck. Removed old connector and spliced in new using heat shrink connectors. Confirmed proper operation of the taillights.
BOB D. gave our service a 5 star review on 12/2/2023
Hooked up heads, compensated and took measurements. Found front camber and front toe are out of spec. Jacked up front axle and adjusted front camber/caster to within spec. Set axle down, set steering wheel straight and adjusted toe to within spec. Test drove and confirmed proper operation.
JOE K. gave our service a 5 star review on 10/12/2023